Difference between revisions of "NIC2.0"
| Line 24: | Line 24: | ||
Contact NE Sales – sales(at)neuroelectrics.com – to request a device upgrade. | Contact NE Sales – sales(at)neuroelectrics.com – to request a device upgrade. | ||
| + | |||
| + | == System requirements == | ||
| + | |||
| + | NIC2.0 is compatible with both Windows and Mac OS computers. | ||
| + | The computer where NIC2.0 is suppose to run must have the following minimum requirements: | ||
| + | |||
| + | • Processor: 1.6 GHz | ||
| + | • RAM: 2 GB | ||
| + | • Interfaces: USB, WiFi and/or Bluetooth® (3.0 or 2.1) | ||
| + | • Screen resolution: 1280 x 768 | ||
Revision as of 15:50, 14 November 2016
NIC2.0 is the new and redesigned version of the former Neuroelectrics Instrument Controller (NIC) application.
With a modern and intuitive interface, NIC2.0 allows computers to interact and control Neuroelectrics devices, such as Enobio 8 and Starstim 32. NIC2.0 is equipped with basic and advanced modes to design and monitor any experiment involving electroencephalography (EEG) and/or non invasive brain stimulation with transcranial current stimulation (tCS).
Device compatibility
NIC2.0 is intended to be used only with Neuroelectrics® devices. NIC2.0 is not compatible with out-dated devices. Check the firmware version of your device and proceed accordingly:
• Firmware greater or equal to 1.2.51:
Your device requires no upgrade – it is fully compatible with NIC2.0. Download NIC2.0 and start using it!
• Firmware inferior to 1.2.51, and greater or equal to 1.2.30: Your device requires a firmware update to become compatible with NIC2.0. Such update can be remotely performed. Contact NE Support – support(at)neuroelectrics.com – to schedule a session to remotely update your device.
• Firmware inferior to 1.2.30, and greater or equal to 1.2.07: Your device requires a firmware update to become compatible with NIC2.0 Such update must be done at Neuroelectrics manufacturing site. Contact NE Support – support(at)neuroelectrics.com – to manage the device shipment and upgrade process.
• Firmware inferior to 1.2.07: The device hardware must be upgraded to become compatible with NIC2.0. Contact NE Sales – sales(at)neuroelectrics.com – to request a device upgrade.
System requirements
NIC2.0 is compatible with both Windows and Mac OS computers. The computer where NIC2.0 is suppose to run must have the following minimum requirements:
• Processor: 1.6 GHz • RAM: 2 GB • Interfaces: USB, WiFi and/or Bluetooth® (3.0 or 2.1) • Screen resolution: 1280 x 768
NIC2.0 Manual & Donwload
NIC2.0 is compatible with both Windows and Mac OS computers. Use the following hyperlinks to have access to the NIC User Manual and respective installation files:
